CLCYDS730 Digital Dissolved Ozone Sensor Electrode principle characteristics:
Product Description:
Constant voltage principle electrode is used to measure dissolved ozone or hypochlorous acid in water. The constant voltage measurement method is to maintain a stable potential at the electrode measuring end, and different measured components produce different current intensities under this potential. It consists of two platinum electrodes and a reference electrode to form a micro current measurement system. The dissolved ozone or hypochlorous acid in the water sample flowing through the measuring electrode will be consumed. Therefore, the water sample must be kept flowing continuously through the measuring electrode during measurement.
The constant voltage measurement method uses a secondary instrument to continuously and dynamically control the potential between the measuring electrodes, eliminating the inherent resistance and oxidation-reduction potential of the measured water sample, so that the electrode can measure the current signal and the measured water sample concentration A good linear relationship is formed between them, with a very stable zero point performance, ensuring accurate and reliable measurement.
The constant voltage electrode has a simple structure and a glass appearance. The front end of the online residual chlorine electrode is a glass bulb, which is easy to clean and replace. When measuring, it is necessary to ensure that the water flow rate through the dissolved ozone measuring electrode is stable.
This product is a digital sensor that integrates electronic circuits and microprocessors inside the sensor, referred to as digital electrode.
Constant voltage residual chlorine digital electrode sensor (RS-485) Features
1. Power supply and output isolation design to ensure electrical safety
2. Built-in protection circuit for power supply and communication chip, strong anti-interference ability
3. With comprehensive protection circuit design, it can work reliably without additional isolation equipment
4. The circuit is built inside the electrode, which has good environmental tolerance and easier installation and operation
5. RS-485 transmission interface, MODBUS-RTU communication protocol, two-way communication, can receive remote commands
6. The communication protocol is simple and practical and extremely convenient to use
7. Output more electrode diagnostic information, more intelligent
8. The internal integrated memory can still memorize the stored calibration and setting information after power off
9. POM shell, strong corrosion resistance, PG13.5 thread, easy to install.
Technical parameters:
| Model No.: |
CLCYDS730 |
| Power/Outlet: |
12VDC/RS485 MODBUS RTU |
| Measurement method: |
Potentiostatic |
| Housing material: |
Glass+POM |
| Waterproof rating: |
IP68 |
| Measurement range: |
0-2mg/L;0-10mg/L;0-20mg/L |
| Accuracy: |
±1%F.S |
| Pressure resistance: |
≤0.3Mpa |
| Temperature compensation: |
NTC10K |
| Temperature range: |
0-80ºC |
| Measuring/Storage Temperature: |
0-45ºC |
| Calibration: |
Sample calibration, standard liquid calibration |
| Connection methods: |
4 core cable |
| Cable length: |
Standard 5m cable, can be extended to 100m |
| Installation thread: |
PG13.5 |
Application:
Drinking water: ensuring reliable disinfection
Food: to ensure food safety, sanitary bag and bottle methods
Public works: detection of residual chlorine
Pool water: efficient disinfectant
No additional instrument is required, 485 signal transmission, no interference on site, easy to integrate into various systems, and effectively reduce related use costs.
The electrodes can be calibrated in the office or laboratory, and replaced directly on site, without additional on-site calibration, which greatly facilitates later maintenance
Calibration information record is stored in electrode memory.
Production:
Company profile:
We-Suzhou Skying Control Technology Co., Ltd. is a leading manufacturer, supplier and exporter of water analysis instruments.
We specialize in the production water quality analysis instruments and various sensors:
1. Online PH/ORP meter and sensors; Conductivity meter, TDS meter, dissolved oxygen meter,
fluorescence dissolved oxygen meter, residual chlorine analyzer, chlorine dioxide analyzer,
acid-base salt analyzer, dissolved ozone meter, nitrate meter, turbidity meter,
2. Multi-parameter water quality analysis instrument controller, portable water quality analysis instrument
3. Digital online controllers and sensors, (PH/ORP/Conductivity/TDS/dissolved oxygen/residual chlorine......)
4. COD sensor
5. Pen type
6. Portable
The product range covers industrial, handheld, laboratory, aquarium, agriculture and other application fields.
In addition, we also provide instrument-related products such as instrument protection boxes, integrated systems, and control panels.
Products are widely used in power plants, petrochemicals, mining and metallurgy, environmental protection water treatment, light industry electronics, water plants and drinking water pipe networks, food and beverages, hospitals, hotels, aquaculture, new agricultural planting and biological fermentation processes and other industries.
Excellent Quality, best price, excellent after-sales service and technical support, as well as good communication with customers, that makes us be preferred the partner for many overseas customers.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}